1. Jun 29, 2019  Intel GMA 4500 MHD Extreme Plus (by nIGHTmAYOR) Full Name: Intel (R) Graphics Media Accelerator Family Aliases: Intel Graphics Media Accelerator 4500MHD Driver for Windows 10 Version: 107.0.777.64 (2993/2869 Mod) Rebranded: Intel (R) HD Graphics Family 1 - Make sure you have System Restore enabled before installation for safety.
2. Intel GMA 4500MHD Win10/32bit Driver. Fulviot66 Posts: 28 Member Troubleshooter. June 2018 in ConceptD, TravelMate and Extensa. Hi Guys, did someone know where I can.
3. For embedded platforms based on the Intel® Core™ processor, Intel® Pentium® processor or Intel® Celeron® processor with chipsets older than the Intel® 5 Series Chipset, refer to Intel® Embedded Graphics Drivers documentation. Intel HD Graphics Drivers for Linux. are available in source format at www.intellinuxgraphics.org. Support for Intel graphics hardware in Linux distributions is determined by individual operating system vendors.
4. This package provides the Intel GMA 4500HD/4500MHD Driver and is supported on OptiPlex and Latitude models that are running the following Windows Operating System: Windows 7 (64-bit).

1. Intel Gma X4500 Graphics Driver

Intel Graphics Media Accelerator 4500M (GMA 4500M) Compared to the GMA 4500M HD, the 4500M features a slower core clock (400 MHz versus 533MHz) and is thus a bit slower in games. The chip itself is capable of supporting the CPU to decode HD videos, but because of the slower clock rate, the 4500M has troubles decoding 1080p videos fluently.

Hi, If still you are having problems installing the GMA drivers, even if you try compatibility mode. There is another way, I tried and it worked.

Find ' Win 7vista8_64_151719_v2' driver. ( I apologise I do not have direct download link, just Google it and note its for 64 bit OS)

After you download it follow the following steps.

Download msxml 4 sp3. Hi, Andre,Thanks for the suggestions, I tried all of then with the following outcomes:Method 1: when trying to install KB2758694 Windows Installer returns the error message:'Error opening the installation log file.

1. Run Command Prompt as Administrator

2. Type [ bcdedit -set TESTSIGNING ON ]

3. Click enter

4. Restart your PC. ( Your PC will start in test mode. Which enable installation of digitally unsigned drivers)

5. Install the drivers,( just ignore the windows warning about the driver being unsigned)

6. If installation is successful, then Reboot.

NOTE: To remove test mode, just run CMD and type [ bcdedit -set TESTSIGNING OFF] then reboot. BUT THIS DRIVER WON'T WORK IF YOU DO THIS. So you are probably stuck in test mode ... If you are okay with this then you can remove the watermarks which you see on the bottom right of your screen by using a watermark remover program.

This driver is much better and stable than the ones which windows (WDDM 1.1) provides.

So far so good, I haven't exprienced any bug yet.

Intel Gma X4500 Graphics Driver